Haben Sie Fragen? Einfach anrufen, wir helfen gerne: Tel. 089/210233-0
oder besuchen Sie unser Ladengeschäft in der Pacellistraße 5 (Maxburg) 80333 München
+++ Versandkostenfreie Lieferung innerhalb Deutschlands
Haben Sie Fragen? Tel. 089/210233-0

Enhanced Simulation of the Milling Process for a Novel Roughing and Finishing Tool

38,00 €*

Sofort verfügbar, Lieferzeit: 1-3 Tage

Produktnummer: 18b6c5c2ab368344279998e0322a8953db
Autor: Grabowski, Roman
Themengebiete: chatter milling process stability surface quality time delays
Veröffentlichungsdatum: 09.12.2019
EAN: 9783959003889
Auflage: 1
Sprache: Englisch
Seitenzahl: 153
Produktart: Kartoniert / Broschiert
Verlag: TEWISS
Produktinformationen "Enhanced Simulation of the Milling Process for a Novel Roughing and Finishing Tool"
For milling of aluminum alloys a roughing cutter is often used in the first step to achieve a high material removal rate. In order to obtain a high surface quality, the final contour is produced using a finishing cutter. By using a new and patented tool concept, both roughing and finishing operations can be carried out with this one tool. The special feature of this tool concept is based on the different geometric design of the individual cutting edges. A process-optimized design of the tool geometry of the prototype tool can be performed based on a preliminary calculation of the process forces and the dynamic behavior. The corresponding mathematical models have been developed for this purpose. On the basis of experimental investigations, the verification of the roughing and finishing capability of the tool concept was carried out. The results showed that the tool achieved comparable results in both cases to pure finishing and roughing cutters. It follows that the new tool concept can increase productivity by reducing the number of necessary end mills.

Sie möchten lieber vor Ort einkaufen?

Sie haben Fragen zu diesem oder anderen Produkten oder möchten einfach gerne analog im Laden stöbern? Wir sind gerne für Sie da und beraten Sie auch telefonisch.

Juristische Fachbuchhandlung
Georg Blendl

Parcellistraße 5 (Maxburg)
8033 München

Montag - Freitag: 8:15 -18 Uhr
Samstags geschlossen