Haben Sie Fragen? Einfach anrufen, wir helfen gerne: Tel. 089/210233-0
oder besuchen Sie unser Ladengeschäft in der Pacellistraße 5 (Maxburg) 80333 München
+++ Versandkostenfreie Lieferung innerhalb Deutschlands
Haben Sie Fragen? Tel. 089/210233-0

Additive Manufacturing of Bone-Supporting Structures Based on Bioactive Ceramics using LCD Stereolithography

58,80 €*

Sofort verfügbar, Lieferzeit: 1-3 Tage

Produktnummer: 18e32b79f946724e4b8563f6d03ce9b780
Autor: Yared, Wadih
Themengebiete: Additive Manufacturing Bone regeneration Ceramics Stereolithography
Veröffentlichungsdatum: 23.04.2025
EAN: 9783844099461
Auflage: 1
Sprache: Englisch
Seitenzahl: 185
Produktart: Kartoniert / Broschiert
Verlag: Shaker
Produktinformationen "Additive Manufacturing of Bone-Supporting Structures Based on Bioactive Ceramics using LCD Stereolithography"
This research focuses on developing biocompatible and bioresorbable ceramic bone grafts using LCD stereolithography, an additive manufacturing (AM) process known for its high precision and surface quality. The study covers key stages from material selection and CAD design to resin formulation, manufacturing optimization, and final characterization. Special emphasis is placed on creating ceramic-filled resins by distilling monomers, functionalizing ceramic powders, and ensuring proper dispersion to prevent agglomerates that cause defects. The curing kinetics of these resins are enhanced by optimizing photoinitiators and oligomer concentrations to improve cross-link density. To control scaffold porosity, the study employs sacrificial templating, using emulsion polymerized PS particles as templates. This technique enables the fabrication of scaffolds with tailored pore sizes and morphologies after debinding and sintering. Additionally, mechanical modifications to the LCD system and the development of custom devices like the Wadih-mat lithography machine and a photorheological accessory support efficient resin testing and curing characterization. Geometric manufacturability is assessed by testing minimum bore diameters, wall thicknesses, unsupported bridges, and abrupt thickness changes. The study also explores machine learning models to optimize process parameters, reducing reliance on subjective expertise. The research concludes with guidelines for Good Research Practices (GRP) in ceramic AM using LCD stereolithography, ensuring reliable and reproducible bone graft production.

Sie möchten lieber vor Ort einkaufen?

Sie haben Fragen zu diesem oder anderen Produkten oder möchten einfach gerne analog im Laden stöbern? Wir sind gerne für Sie da und beraten Sie auch telefonisch.

Juristische Fachbuchhandlung
Georg Blendl

Parcellistraße 5 (Maxburg)
8033 München

Montag - Freitag: 8:15 -18 Uhr
Samstags geschlossen